![]() |
||||||||
|
|
||||||||
Shopping Basket
Note: All prices in US Dollars
|
Artex ME406 "ACE" 121.5/406 MHz (200 Kts) ACK/Ameri-King Replacement
Artex is proud to introduce ELT ME406 ACE. The ME406 ACE (for "Absolute Cost Efficiency") provides a simple and in-expensive upgrade solution from 121.5 MHz ACK and Ameri-King systems to the new Artex 406 MHz ELT technology. No alterations requirements for remote switch cut-out on instrument panel, re-usability of existing wiring harness and mounting holes of the Artex mounting tray lining up with the ACK ELT allow for extremely simplified installation for maximum cost reduction. ***This is the most popular selling General Aviation ELT from Artex for replacement of an ACK or Ameri-King ELT for it's low cost and easy installation.*** 2 year warranty. *** This ELT comes with a Whip antenna good to 200 Kts IAS*** ACE FEATURES: Comes with: ELT, 5 year battery, mounting tray, coax cable and installation hardware, whip antenna, alert buzzer, remote switch, 18 month warrany No alterations or very little alteration (depending on previous remote swith type) of instrument panel necessary for remote switch Self powered remote switch - no aircraft power is required for the remote switch (uses own internal 5 year battery) Re-use existing wiring harness from remote switch to ELT (for Ameri-King and ACK replacement) others will require different wires Mounting holes on Artex ME406 line up with existing holes for ACK ELT Extremely simplified installation for maximum cost efficiency Based on popular Artex ME406 system The Artex ME-406 is a single output ELT. Two emergency frequencies (121.5 and 406.028 MHz) utilize the same RF output, which requires only one coax cable to connect to the new series of Artex single input antennas.The ELT automatically activates during a crash and transmits the standard swept tone on 121.5 MHz.Every 50 seconds for 440 milliseconds the 406 MHz transmitter turns on and transmits an encoded digital message to the Cospas/Sarsat satellite system.The mounting hardware for the ME-406 Series is compatible with all previous models of Artex 406 MHz, as well as theELT200 Series, ACK, Pointer Model 3000 ELT and Narco ELT’s. Current owners of Artex 2-frequency ELT can re-use the remote switch in the cockpit as well as the wiring harness from the cockpit to the ELT thus greatly reducing installation costs. Artex ME406 ELT Features: GPS upgradeable Immediate search and rescue response Position accuracy within 3 km Transmitter is identified by serial number or aircraft ID Worldwide coverage 5-year battery life LiSO2/ LiMnO2 TSO-C126,ETSO-2C126 pending, COSPAS/SARSAT approved Mounting holes compatible with most existing ELT housings Single antenna output for both frequencies. Designed especially for General Aviation 20 years of ELT design experience results in a breakthrough in design A low cost solution to 406Mhz technology requirements 121.5 and 406 MHz ELT weight: 2 lbs. |
|||||||
About Us | Contact Us | FAQs | Policies | Privacy Policy | Links | Site Map | support@survivalaviation.com |
||||||||